 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MicroCapacitance (MC) SIDACtor Device MicroCapacitance (MC) SIDACtor Device The TO-92 MC SIDACtor series is intended for applications sensitive to load values. Typically, high speed connections require a lower capacitance. CO values for MC devices are 40% lower than a standard EC part. This MC SIDACtor series is used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968-A (formerly known as FCC Part 68) without the need of series resistors. Electrical Parameters Part Number * P0640EC MC P1500EC MC P2600EC MC P3100EC MC VDRM Volts 58 140 220 275 VS Volts 77 180 300 350 VT Volts 4 4 4 4 IDRM Amps 5 5 5 5 IS mAmps 800 800 800 800 IT Amps 2.2 2.2 2.2 2.2 IH mAmps 150 150 150 150 CO pF 60 50 40 40 * For surge ratings, see table below. General Notes: * All measurements are made at an ambient temperature of 25 C. IPP applies to -40 C through +85 C temperature range. * IPP is a repetitive surge rating and is guaranteed for the life of the product. * Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities. * VDRM is measured at IDRM. * VS is measured at 100 V/s. * Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request. * Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias. Surge Ratings IPP 2x10 s Amps 500 IPP 8x20 s Amps 400 IPP 10x160 s Amps 200 IPP 10x560 s Amps 150 IPP 10x1000 s Amps 100 ITSM 60 Hz Amps 50 di/dt Amps/s 500 Series C http://www.littelfuse.com +1 972-580-7777 2 - 18 (c) 2004 Littelfuse, Inc. SIDACtor(R) Data Book and Design Guide MicroCapacitance (MC) SIDACtor Device Thermal Considerations Package TO-92 Symbol TJ TS RJA Parameter Operating Junction Temperature Range Storage Temperature Range Thermal Resistance: Junction to Ambient Value -40 to +150 -65 to +150 90 Unit C C C/W +I +I IPP - Peak Pulse Current - %IPP tr = rise time to peak value td = decay time to half value IT IT IS S IH IDRM -V -V VT VT VDRM VDRM VS V S 100 Peak Value Waveform = tr x td +V +V 50 Half Value 0 0 tr td t - Time (s) -I -I V-I Characteristics tr x td Pulse Wave-form 14 Percent of VS Change - % 10 IH (TC = 25 C) 12 8 6 4 2 0 -4 -6 -8 -40 -20 0 20 40 60 80 100 120 140 160 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 IH 25 C 25 C Ratio of Case Temperature (TC) - C Junction Temperature (TJ) - C Normalized VS Change versus Junction Temperature Normalized DC Holding Current versus Case Temperature (c) 2004 Littelfuse, Inc. SIDACtor(R) Data Book and Design Guide 2 - 19 http://www.littelfuse.com +1 972-580-7777 Data Sheets |
Price & Availability of P3100ECMC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |